木村好里　准教授 業績リスト抜粋（2004年以降）

原著論文および国際会議論文（査読あり）

• Yoshisato Kimura, Kazuyuki Handa, Kunio Hayashi and Yoshinao Mishima: “Microstructure Control and Ductility Improvement of the Two-Phase ?-Fe/?-(Fe, Mn)3AlC Alloys in the Fe-Mn-Al-C Quaternary System”, Intermetallics, 12(2004), pp. 607-617.
• Keisuke Yamamoto, Yoshisato Kimura and Yoshinao Mishima: “Phase Constitution and Microstructure of the Fe-Si-Cr Ternary Ferritic Alloys”, Scripta Materialia, 50(2004), No. 7 Apr., pp. 977-981.
• Keisuke Yamamoto, Yoshisato Kimura and Yoshinao Mishima: “Precipitation of the Icosahedral Quasicrystalline Phase, R-phase and Laves Phase in Ferritic Alloys”, Mater. Trans., 45(2004), No. 2 Feb., pp. 357-360.
• Yumi Hayashi, Sung-Wng Kim, Yoshisato Kimura and Yoshinao Mishima: “Thermoelectric Properties of Several P- and N-Type Half-Heusler Compounds and Effects of Dopants”, Proc. of TMS 2004 Annual Meeting Symp. on Advanced Materials for Energy Conversion II, TMS, Warrendale, PA, (2004), pp. 367-374.
• Sung-Wng Kim, Yoshisato Kimura and Yoshinao Mishima: “The Enhancement of High Temperature Thermoelectric Properties of TiNiSn Based Half-Heusler Compounds”, Proc. of TMS 2004 Annual Meeting Symp. on Advanced Materials for Energy Conversion II, TMS, Warrendale, PA, (2004), pp. 377-384.
• Sung-Wng Kim, Yoshisato Kimura and Yoshinao Mishima: “Enhancement of High Temperature Thermoelectric Properties of Intermetalic Compounds Based on a Skutterudite IrSb3 and a Half-Heusler TiNiSn”, Science and Technology of Advanced Materials, 5(2004), pp. 485-489.
• Keisuke Yamamoto, Yoshisato Kimura and Yoshinao Mishima: “Orientation Relationships of Icosahedral Quasicrystalline Phase and Laves Phase Precipitates in a Ferritic Alloy”, Mater. Trans., 45(2004), No. 8 Aug., pp. 2598-2601.
• Nobuaki Sekido, Yoshisato Kimura, Seiji Miura and Yoshinao Mishima: “Solidification Process and Mechanical Behavior of the Nb/Nb5Si3 Two-Phase Alloys in the Nb-Ti-Si System”, Mater. Trans., 45(2004), pp. 3264-3271.
• Yoshinao Mishima, Keisuke Yamamoto, Yoshisato Kimura, M. Nori Uchida and Hiroshi Kawamura: “Microstructure and Mechanical Properties of Be12Ti/(Be) and Be12V/(Be) Two-phase Alloys”, Proc. of the 6th IEA Intnl. Workshop on Beryllium Technology for Fusion, JAERI-Conf. 2004-006, Japan Atomic Energy Research Institute, Japan, (2004), pp. 184-189.
• Sung-Wng Kim, Yoshisato Kimura and Yoshinao Mishima: “Effect of Partial La Filling on High Temperature Thermoelectric Properties of IrSb3 Based Skutterudite Compounds”, J. Electronic Mater., 33(2004), pp. 1156-1161.
• Keisuke Yamamoto, Yoshisato Kimura and Yoshinao Mishima: “Precipitation of Icosahedral Quasicrystalline Phase, R-Phase and Laves Phase in Ferritic Alloys”, Transactions of Materials and Heat Treatment, 25(2004), No. 5 Oct., pp. 229-233.
• Yoshisato Kimura, Hiroaki Yamaoka, Nobuaki Sekido and Yoshinao Mishima: “Processing, Microstructure, and Mechanical Properties of (Nb)/Nb5Si3 Two-Phase Alloys”, Metal. Mater. Trans. A, 36A(2005), pp. 483-488.
• Yoshisato Kimura, Tatsuya Shimizu, Sachiyori Shiina and Yoshinao Mishima: “Atomic Diffusion and Phase Equilibria at the Interfaces of CoAl/Ir Multi-Layer on Nb5Si3-Base Alloys”, Metal. Mater. Trans. A, 36A(2005), pp. 591-599.
• Yoshisato Kimura, Kiichi Sakai, Shinya Teramoto and Yoshinao Mishima: “Microstructure Control of Co3AlC-base Heat Resistant Alloys using Optical Floating Zone Melting”, Materials Science Forum, Vols. 475-479, Proc. of the 5th Pacific Rim Intl. Conf. on Advanced Materials and Processing, PRICM-5, (2005), pp. 833-836.
• Keisuke Yamamoto, Yoshisato Kimura and Yoshinao Mishima: “Precipitation Behavior and Phase Stability of Intermetallic Phases in Fe-Cr-W-Co Ferritic Alloys”, Materials Science Forum, Vols. 475-479, Proc. of the 5th Pacific Rim Intl. Conf. on Advanced Materials and Processing, PRICM-5, (2005), pp. 845-848.
• Seiji Miura, Kenji Ohkubo, Yoshihiro Terada, Yoshisato Kimura, Yoshinao Mishima, Yoko Yamabe-Mitarai, Hiroshi Harada and Tetsuo Mohri: “Ir-rich portion of Ir-Al-X (X: Ti, Zr and Hf) Ternary systems” J. Alloys and Compounds, 393(2005), pp. 239-247.
• Seiji Miura, Kenji Ohkubo, Yoshihiro Terada, Yoshisato Kimura, Yoshinao Mishima, Yoko Yamabe-Mitarai, Hiroshi Harada and Tetsuo Mohri: “Ir-rich portion of Ir-Al-X (X: V, Nb and Ta) Ternary systems”, J. Alloys and Compounds, 395(2005), pp. 263-271.
• Yoshisato Kimura and Yoshinao Mishima: “Formation of gFe/k-(Fe, Mn)3AlC Lamellar Microstructures and Improvement of Ambient Temperature Ductility”, The 3rd Asian Conference on Heat Treatment of Materials, The Korean Society for Heat Treatment, Seoul, (2005), pp. 385-387.
• Yoshisato Kimura, Fu-Gao Wei, Hideyuki Ohtsuka and Yoshinao Mishima: “Magnetic Properties of E21-base Co3AlC and the Correlation with the Ordering of Carbon Atoms and Vacancies”, MRS Symp. Proc., vol. 842, Integrative and Interdisciplinary Aspects of Intermetallics, Mater. Res. Soc., Pittsburgh, PA, (2005), pp. 395-400.
• Yoshisato Kimura, Kiichi Sakai and Yoshinao Mishima: “Revolutionary Microstructure Control with Phase Diagram Evaluation for the Design of E21 Co3AlC Based Heat Resistant Alloys”, Phase Equilibria and Diffusion, 27(2006), No. 1 Feb., pp. 14-21.
• Yoshisato Kimura, Kaoru Iida, Fu-Gao Wei and Yoshinao Mishima: “Phase Equilibria in the T-Al-C (T: Co, Ni, Rh, Ir) and T-Al-B (T: Rh, Ir) Systems for the Design of E21-Co3AlC Based Heat Resistant Alloys”, Intermetallics, 14(2006), No. 5 May, pp. 508-514.
• Hiroshi Usuba, Keisuke Yamamoto, Yoshisato Kimura and Yoshinao Mishima: “Phase Equilibria and Microstructures in the Fe-Si-Cr-Ti System”, Intermetallics, 14(2006), No. 5 May, pp. 505-507.
• Keisuke Yamamoto, Hiroshi Usuba, Yoshisato Kimura and Yoshinao Mishima: “Effect of Matrix Microstructure on Precipitation of Laves Phase in Fe-10Cr-1.4W(-Co) Alloys”, Intermetallics, 14(2006), No. 5 May, pp. 515-520.
• Nobuaki Sekido, Fu-Gao Wei, Yoshisato Kimura, Seiji Miura and Yoshinao Mishima: “Orientation Relationship Between Nb and Nb5Si3 (D8l) Phase in the Eutectoid Lamellar Microstructure”, Phil. Mag. Lett., 86(2006), pp. 89-98.
• Yoshisato Kimura, Kiichi Sakai, Fu-Gao Wei and Yoshinao Mishima: “Extra Ordering of Carbon Atoms and Mechanical Properties of E21 Co3AlC Based Heat Resistant Alloys”, Intermetallics, 14(2006), No. 10-11 Oct. Nov., pp. 1262-1269.
• Yoshisato Kimura, Masaharu Komiyama and Yoshinao Mishima: “Microstructure and Mechanical Properties of MoSi2/TaSi2 Two-phase Alloys”, Intermetallics, 14(2006), pp. 1358-1363.
• Yoshisato Kimura, Tomoya Kuji, Akihisa Zama, Yasufumi Shibata and Yoshinao Mishima: “High-Performance of Half-Heusler MNiSn (M=Hf,Zr) Single-Phase Thermoelectric Alloys Fabricated using Optical Floating Zone Melting”, MRS Symp. Proc., vol. 886, Materials and Technologies for Direct Thermal-to-Electric Energy Conversion, Mater. Res. Soc., Pittsburgh, PA, (2006), pp. 331-336.
• Sung-Wng Kim, Yoshisato Kimura, Yoshinao Mishima, Sung-Kil Hong and Dap-Chun Choi: “Effects of Heat Treatment on Thermoelectric Properties of TiNiSn Half-Heusler Compound”, J. Kor. Inst. Met. and Mater., 44(2006), pp. 503-510.
• Sung-Wng Kim, Yoshisato Kimura, Yoshinao Mishima, Sung-Kil Hong and Dap-Chun Choi: “Optimization of High Temperature Thermoelectric Properties of TiNiSn-Based Half-Heusler Compounds”, J. Kor. Inst. Met. and Mater., 44(2006), pp. 511-517.
• Yoshisato Kimura, Akihisa Zama and Yoshinao Mishima: “Thermoelectric Properties of P-type Half-Heusler Compounds HfPtSn and ZrPtSn”, Proc. of the 25th International Conference on Thermoelectric (ICT 2006), IEEE, Piscataway, NJ, (2006), pp. 115-119.
• Yoshisato Kimura and Akihisa Zama: “Thermoelectric Properties of P-type Half-Heusler Compound HfPtSn and Improvement for High-Performance by Ir and Co Additions”, Appl. Phys. Lett, No. 17, 89(2006), pp. 172110-1-172110-3.
• Seiji Miura, J.-H. Kim, Kenji Ohkubo, Yoshisato Kimura, Nobuaki Sekido, Yoshinao Mishima and Tetsuo Mohri: “Microstructural Control of Nb-Si Alloy with Invariant Reactions”, Proc. of Thermec 2006, Materials Science Forum, 539-543(2006), pp. 1507-1512.
• Nobuaki Sekido, Yoshisato Kimura, Seiji Miura, Fu-Gao Wei and Yoshinao Mishima: “Fracture Toughness and High Temperature Strength of Unidirectionally Solidified Nb-Si Binary and Nb-Si-Ti Ternary Alloys”, J. Alloys and Compounds, 425(2006), pp. 223-229.
• Nobuaki Sekido, Yoshisato Kimura, Seiji Miura and Yoshinao Mishima: “Microstructure Development of Unidirectionally Solidified (Nb)/Nb3Si Eutectic Alloys”, Mater. Sci. Eng. A, 444(2007), No. 1-2 Mar., pp. 51-57.
• Sung-Wng Kim, Yoshisato Kimura and Yoshinao Mishima: “High Temperature Thermoelectric Properties of TiNiSn-based Half-Heusler Compounds”, Intermetallics, 15(2007), No. 3 Mar., pp. 349-356.
• Yoshisato Kimura, Tomoya Kuji, Akihisa Zama, Taiki Lee and Yoshinao Mishima: “Thermoelectric Properties of Half-Heusler Compounds N-type MNiSn and P-type MPtSn (M = Hf, Zr)”, MRS Symp. Proc., vol. 980, Advanced Intermetallic-Based Alloys, Mater. Res. Soc., Pittsburgh, PA, (2007), pp. 211-216.
• Seiji Miura, Yuki Murasato, Kenji Ohkubo, Yoshisato Kimura, Nobuaki Sekido, Yoshinao Mishima and Tetsuo Mohri: “Microstructure Control of Nb-Si Alloy Doped with Zr and Mg Through Eutectic and Eutectoid Reactions and its Deformation Behavior”, MRS Symp. Proc., vol. 980, Advanced Intermetallic-Based Alloys, Mater. Res. Soc., Pittsburgh, PA, (2007), pp. 327-332.
• Andrey Belyakov, Kaneaki Tsuzaki, Yuji Kimura, Yoshisato Kimura and Yoshinao Mishima: “Comparative study on microstructure evolution upon unidirectional and multidirectional cold working in an Fe-15%Cr ferritic alloy”, Mater. Sci. Eng. A, 456(2007), No. 1-2 Mar., pp. 323-331.
• Andrey Belyakov, Kaneaki Tsuzaki, Yoshisato Kimura and Yoshinao Mishima: “Recovery in 15%Cr ferritic stainless steel after large strain deformation”, Materials Science Forum, Vols. 558-559, Part 1, Proc. of the Third International Conference on Recrystallization and Grain Growth, ReX and GG III, (2007), pp. 119-124.
• Andrey Belyakov, Fu-Gao Wei, Kaneaki Tsuzaki, Yoshisato Kimura and Yoshinao Mishima: “Incomplete Recrystallization in Cold Worked Steel Containing TiC”, Mater. Sci. Eng. A, 471(2007), No. 1-2 Dec., pp. 50-56.
• Andrey Belyakov, Kaneaki Tsuzaki, Yoshisato Kimura and Yoshinao Mishima: “Annealing Behavior of a Ferritic Stainless Steel Subjected to Large Strain Cold Working”, J. Mater. Res., 22(2007), No. 11 Nov., pp. 3042-3051.
• Yoshisato Kimura, Mototsugu Ohsaki, Hiroki Fujita and Yoshinao Mishima: “Phase Equilibria and Atomic Diffusion in the Ir/CoAl System”, Materials Science Forum, Vols. 561-565, Part 1, Proc. of the 6th Pacific Rim Intl. Conf. on Advanced Materials and Processing, PRICM-6, (2007), pp. 477-480.
• Yoshisato Kimura, Yukio Tamura and Takuji Kita: “Thermoelectric Properties of Directionally Solidified Half-Heusler Compound NbCoSn Alloys”, Appl. Phys. Lett., 92(2008), pp. 012105-1 - 012105-3.
• Yoshisato Kimura, Yukio Tamura and Takuji Kita: “Thermoelectric Properties of Nearly Single-Phase Half-Heusler NbCoSn Alloys and Importance of Microstructures for ImprovingPerformance”, MRS Symp. Proc., vol. 1044, Thermoelectric Power Generation, Mater. Res. Soc., Pittsburgh, PA, (2008), pp. 305-310.
• Yosuke Uotani, Yoshisato Kimura and Yoshinao Mishima: “Effects of Ru Additions on Phase Equilibria, Microstructures and Mechanical Properties of E21 Co3AlC1-x Based Alloys”, Proc. of TMS 2008 Annual Meeting Symp. on Structural Aluminides for Elevated Temperature Applications, TMS, Warrendale, PA, (2008), pp. 399-405.
• Yoshisato Kimura Hazuki Ueno, and Yoshinao Mishima: “Thermoelectric Properties of Directionally Solidified Half-Heusler (Ma0.5, Mb0.5)NiSn (Ma, Mb = Hf, Zr, Ti) Alloys”, J. Electronic Mater., in print.
• Kazuyuki Handa, Yoshisato Kimura and Yoshinao Mishima: “Thermo-mechanical Crack Generation and Ultra-fine Grains Formation in Carbon Steel Railway Wheels Under Conditions contact Load and Repeated Heat Input”, Proc. of Materials Science and Technology 2008 Conference (MS&T ’08), Iron and Steel: Steel Product Metallurgy and Applications, TMS, Warrendale, PA, (2008), pp. 2001-2009.
• Kazuyuki Handa, Yoshisato Kimura and Yoshinao Mishima: “Ferrite and Spheroidized Cementite Ultra-Fine Grains Formation in Fe-0.67%C Railway Wheels Under Contact Stress and Frictional Heat”, Proc. of The 17th Intnl. Federation for Heat Treatment and Surface Eng. (IFHTSE) Congress 2008, The Japan Soc. for Heat Treatment, Tokyo, (2008), in print.
• Yoshisato Kimura, Hazuki Ueno, Takahiro Kenjo, Chihiro Asami and Yoshinao Mishima: “Phase Stability and Thermoelectric Properties of Half-Heusler (Ma, Mb)NiSn (Ma, Mb = Hf, Zr, Ti)”, MRS Symp. Proc., Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications, Mater. Res. Soc., Pittsburgh, PA, (2009), in print.
• Chihiro Asami, Yoshisato Kimura, Takuji Kita and Yoshinao Mishima: “Diffusion Paths for the Formation of Half-Heusler Type Thermoelectric Compound TiNiSn”, MRS Symp. Proc., Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications, Mater. Res. Soc., Pittsburgh, PA, (2009), in print.
• Yoshihito Sekito, Seiji Miura1, Kenji Ohkubo, Tetsuo Mohri, Norihito Sakaguchi, Seiichi Watanabe, Yoshisato Kimura, and Yoshinao Mishima: “Effect of Growth Rate on Microstructure and Microstructure Evolution of Directionally Solidified Nb-Si Alloys”, MRS Symp. Proc., Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications, Mater. Res. Soc., Pittsburgh, PA, (2009), in print.
• Nobuaki Sekido, Seiji Miura, Yoko Yamabe-Mitarai, Yoshisato Kimura and Yoshinao Mishima: “Deformation Behavior of Niobium Silicides during High Temperature Compression”, MRS Symp. Proc., Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications, Mater. Res. Soc., Pittsburgh, PA, (2009), in print.
• Andrey Belyakov, Kaneaki Tsuzaki, Yoshisato Kimura and Yoshinao Mishima: “Tensile Behaviour of Submicrocrystalline Ferritic Steel Processed by Large-Strain Deformation”, Phil. Mag. Lett., 89(2009), No.3, pp. 201-212.

解説・その他

• 木村好里：“一方向凝固によるhalf-Heusler型化合物単相合金の作製と熱電特性”, 日本熱電学会誌，Vol. 4 No. 1 (2007), 日本熱電学会, pp.12-14
• 木村好里：“環境調和型の高性能熱電変換材料を目指すHalf-Heusler型化合物”，平成19年度 学術討論会 有害・希少元素代替のための３ｄ多元系機能材料の開発研究，日本金属学会・日本鉄鋼協会東海支部，2008年1月，pp. 10-15.
• 半田和行，木村好里：口絵 “高炭素鋼鉄道車輪における超微細組織の形成” 熱処理，Vol. 48 No. 6 (2008)，日本熱処理技術協会，pp. 343-344.
• 木村好里：“E21型金属間化合物の構造空孔と機械的性質”，東北大学金属材料研究所ワークショップ「格子欠陥研究の現状と今後の在り方」(第２回)，東北大学・金属材料研究所，2009年1月，p.39.
• 木村好里：“エネルギー変換材料の開発における状態図の利用”，状態図セミナー「エネルギー・環境・資源問題と状態図の役割」，日本学術振興会・合金状態図第172委員会，2009年3月，pp. 19-24.

研究報告書

• 木村好里：“強磁場を用いた超微細組織化による耐熱合金の強靭化”，戦略的創造研究推進事業，個人型研究(さきがけタイプ)研究報告書，「組織化と機能」領域 ２期生，研究総括 国武豊喜，独立行政法人 科学技術振興機構，(2004)，pp. 67-76.
• 木村好里，清水達也，大崎元嗣，三島良直：“Evaluation for the Potential of Ir as Diffusion Barrier Layers Applied for the Multi-Layered Thermal-Coatings（耐熱コーティングにおける拡散障壁層Irの性能評価）”，合金状態図第172委員会，研究報告書Vol. 5 No. 2 (2005)，日本学術振興会，pp. 128-134.
• 木村好里，寺本真也，坂井喜一，大塚秀幸，三島良直：“E21-Co3AlCにおけるC原子の規則化−磁気特性および機械的性質に及ぼす影響−”，強磁場を利用した鉄鋼材料の組織制御研究会報告書，（社）日本鉄鋼協会，(2006)，pp. 89-99.
• 木村好里，田村幸雄，三島良直：“Effects of Microstructures on Thermoelectric Properties of Half-Heusler Type NbCoSn and Phase Equilibria in the Nb-Co-Sn Ternary System（Half-Heusler型NbCoSnの熱電特性に及ぼす組織の影響およびNbCoSn三元系の相平衡）”，合金状態図第172委員会，研究報告書Vol. 7 No. 2 (2007)，日本学術振興会，pp. 68-74.
• 木村好里，坂井喜一，魚谷洋輔，三島良直：“Mechanical Properties of E21 Type Co3AlC1-x Single Crystal and Influence of Anti Phase Domain Size on Plastic Deformability（E21型Co3AlC1-x単結晶の塑性変形挙動と逆位相領域サイズの影響）”，合金状態図第172委員会，研究報告書Vol. 8 No. 2 (2008)，日本学術振興会，pp. 29-35.

特 許

• 木村好里，E21型金属間化合物Co3AlCに近似する組成の単相の多結晶組織と単結晶からなるコバルト−アルミニウム−炭素系合金及びその製造方法，国内特許出願番号：特願2003-395711，出願日2003年11月26日，公開番号：特開2005-154840，公開日2005年6月16日，登録番号：特許登録第4186068号，登録日2008年9月19日
  
• 木村好里，柴田靖文，熱電変換材料及びその製造方法，国内特許出願番号：特願2005-039872，出願日2005年2月16日，公開番号：特開2006-228912，公開日2006年8月31日
• 木村好里，柴田靖文，熱電変換材料及びその製造方法，国内特許出願番号：特願2005-278773，出願日2005年9月26日，公開番号：特開2007-88395，公開日2007年4月5日
• 木村好里，座間暁久，加藤晃，木太拓志，熱電変換材料及びその製造方法，国内特許出願番号：特願2006-077423，出願日2006年3月20日，公開番号：特開2007-258254，公開日2007年4月5日
• 木村好里，田村幸雄，木太拓志，熱電変換材料及びその製造方法，国内特許出願番号：特願2006-251577，出願日2006年9月15日
• 木村好里，浅見千裕，寺西利治，低融点金属及び高融点金属を含む金属間化合物合金の物体を成形製作する方法，国内特許出願番号：特願2007-241210，出願日2007年9月18日
• 木村好里，浅見千裕，木太拓志，ハーフホイスラー熱電材料の製造方法，国内特許出願番号：特願2007-234162，出願日2007年9月10日
• 木村好里，浅見千裕，木太拓志，ハーフホイスラー熱電材料の製造方法，国内特許出願番号：特願2008-231347，出願日2008年9月9日
• 木太拓志， 木村好里，ハーフホイスラー熱電材料の製造方法，国内特許出願番号：特願2008-241067，出願日2008年9月19日
• 木村好里，田之口利恭，木太拓志，ハーフホイスラー熱電材料，国内特許出願番号：特願2009-074418，出願日2009年3月25日

受 賞

• 日本金属学会功績賞（第67回），2009年3月28日．

Kimura Lab. all rights reserved.
Drop Down Menu by CSSMenuMaker.com